Influence of Thermomechanical Treatments on Mechanical Properties and Fracture Mechanism of High-Nitrogen Austenitic Steel / V. Moskvina [et al.]

Уровень набора: (RuTPU)RU\TPU\network\4816, AIP Conference ProceedingsАльтернативный автор-лицо: Moskvina, V., Valentina;Astafurova, E., Elena;Maier, G., Galina;Melnikov, E., Eugene;Astafurov, S., Sergey;Burlachenko, A., Alexander;Galchenko, N., NinaКоллективный автор (вторичный): Национальный исследовательский Томский политехнический университет (ТПУ), (2009- )Язык: английский.Резюме или реферат: In this paper, the mechanical properties and fracture mechanisms of the high-nitrogen austenitic steel Fe-17Cr-10Mn-7Ni-0.95V-0.8N-0.1C (in wt %) processed by different thermomechanical treatments are investigated. Cold rolling and short-time solid solution hardening contribute to the formation of a rather homogeneous fine-grained structures in the steel, which possess high strength, sufficient plasticity and exhibit excellent product of strength and elongation ([sigma][YS]=540-570 MPa, [sigma][UTS]=900-950 MPa, EL=37%, PSE=33-35 GPa %) in comparison with coldrolled specimens possessing high strength properties, but extremely low elongation ([sigma][YS]=1200 MPa, [sigma][UTS]=1650 MPa, EL=1%, PSE=7 GPa %)..Примечания о наличии в документе библиографии/указателя: [References: 13 tit.].Аудитория: .Тематика: электронный ресурс | труды учёных ТПУ | термомеханическая обработка | механические свойства | аустенитные стали | пластичность | обработка | materials treatment | plasticity Ресурсы он-лайн:Щелкните здесь для доступа в онлайн
Тэги из этой библиотеки: Нет тэгов из этой библиотеки для этого заглавия. Авторизуйтесь, чтобы добавить теги.
Оценка
    Средний рейтинг: 0.0 (0 голосов)
Нет реальных экземпляров для этой записи

Title screen

[References: 13 tit.]

In this paper, the mechanical properties and fracture mechanisms of the high-nitrogen austenitic steel Fe-17Cr-10Mn-7Ni-0.95V-0.8N-0.1C (in wt %) processed by different thermomechanical treatments are investigated. Cold rolling and short-time solid solution hardening contribute to the formation of a rather homogeneous fine-grained structures in the steel, which possess high strength, sufficient plasticity and exhibit excellent product of strength and elongation ([sigma][YS]=540-570 MPa, [sigma][UTS]=900-950 MPa, EL=37%, PSE=33-35 GPa %) in comparison with coldrolled specimens possessing high strength properties, but extremely low elongation ([sigma][YS]=1200 MPa, [sigma][UTS]=1650 MPa, EL=1%, PSE=7 GPa %).

Для данного заглавия нет комментариев.

оставить комментарий.