The Tribological Properties and the Microstructure of Cu-Mo-S Coatings / V. P. Sergeev [et al.]

Уровень набора: (RuTPU)RU\TPU\network\4816, AIP Conference ProceedingsАльтернативный автор-лицо: Sergeev, V. P., specialist in the field of materials science, Professor of Tomsk Polytechnic University, doctor of technical Sciences, 1949-, Viktor Petrovich;Zharkov, S. Yu., Stanislav;Kalashnikov, M. P., physicist, Engineer of Tomsk Polytechnic University, Mark Petrovich;Sungatulin, A. R., AlfredКоллективный автор (вторичный): Национальный исследовательский Томский политехнический университет (ТПУ), Институт физики высоких технологий (ИФВТ), Кафедра физики высоких технологий в машиностроении (ФВТМ);Национальный исследовательский Томский политехнический университет (ТПУ), Институт физики высоких технологий (ИФВТ), Кафедра наноматериалов и нанотехнологий (НМНТ)Язык: английский.Резюме или реферат: Coatings on the basis of the Cu-Mo-S system were deposited on the Cu substrate by the method of pulse magnetron sputtering of a special composite target. The wear resistance of the coatings with a copper friction pair was studied using the tribological tests in argon and the air environment. The coating properties were investigated using a variety of methods including SEM, TEM/EDS, and XRD. The fiber-globular structure of the coatings was evaluated. The investigation showed that the Cu-Mo-S coatings could decrease the wear rate of a copper friction pair in ~350 times in the argon atmosphere. A decrease of the friction coefficient of the copper friction pair from 0.59 to 0.27 (with a coating) was observed during the tribological tests in the air environment..Примечания о наличии в документе библиографии/указателя: [References: 6 tit.].Аудитория: .Тематика: электронный ресурс | труды учёных ТПУ | трибологические свойства | микроструктуры | покрытия | магнетронное распыление | износостойкость Ресурсы он-лайн:Щелкните здесь для доступа в онлайн
Тэги из этой библиотеки: Нет тэгов из этой библиотеки для этого заглавия. Авторизуйтесь, чтобы добавить теги.
Оценка
    Средний рейтинг: 0.0 (0 голосов)
Нет реальных экземпляров для этой записи

Title screen

[References: 6 tit.]

Coatings on the basis of the Cu-Mo-S system were deposited on the Cu substrate by the method of pulse magnetron sputtering of a special composite target. The wear resistance of the coatings with a copper friction pair was studied using the tribological tests in argon and the air environment. The coating properties were investigated using a variety of methods including SEM, TEM/EDS, and XRD. The fiber-globular structure of the coatings was evaluated. The investigation showed that the Cu-Mo-S coatings could decrease the wear rate of a copper friction pair in ~350 times in the argon atmosphere. A decrease of the friction coefficient of the copper friction pair from 0.59 to 0.27 (with a coating) was observed during the tribological tests in the air environment.

Для данного заглавия нет комментариев.

оставить комментарий.