Electromagnetic properties of Li0.4Fe2.4Zn0.2O4 ferrite sintered by continuous electron beam heating / A. V. Malyshev [et al.]

Уровень набора: Ceramics International = 1981-Альтернативный автор-лицо: Malyshev, A. V., Specialist in the field of electrical engineering, Senior researcher at Tomsk Polytechnic University, Candidate of Physics and Mathematics (PhD Phys.-Math.), 1978-, Andrei Vladimirovich;Nikolaeva, S. A., specialist in the field of electronics, Laboratory assistant researcher of Tomsk Polytechnic University, 1990-, Svetlana Andreevna;Lysenko, E. N., Specialist in the field of electrical engineering, Head of the laboratory of Tomsk Polytechnic University, Candidate of physical and mathematical sciences, 1972-, Elena Nikolaevna;Vlasov, V. A., Physicist, Senior researcher of Tomsk Polytechnic University, Candidate of physical and mathematical sciences, 1975-, Vitaliy AnatolievichКоллективный автор (вторичный): Национальный исследовательский Томский политехнический университет (ТПУ), Институт неразрушающего контроля (ИНК), Проблемная научно-исследовательская лаборатория электроники, диэлектриков и полупроводников (ПНИЛ ЭДиП)Язык: английский.Резюме или реферат: Lithium-zinc ferrite with the chemical formula of Li0.4Fe2.4Zn0.2O4 was prepared by continuous electron beam heating with electron energy of 1.4 MeV at 1100 °C for 140 min. X-ray diffraction analysis confirmed the formation of cubic spinel structure. From SEM analysis, the average grain size of the ferrite ceramic was 2 µm. The electromagnetic properties of LiZn ferrite were investigated. The samples are characterized by high values of the saturation magnetization, initial permeability and Curie temperature. The value of electrical resistivity is equal to 2.3×103 Ω cm. The high frequency performance of LiZn ferrite samples was estimated by measurement the frequency dispersion of the dielectric constant and dielectric loss. It was shown that the dielectric constant is characterized by normal dielectric behavior with frequency. The results were compared with the previous results obtained for the samples prepared by pulsed electron beam heating..Примечания о наличии в документе библиографии/указателя: [References: p. 16183 (31 tit.)].Аудитория: .Тематика: электронный ресурс | труды учёных ТПУ Ресурсы он-лайн:Щелкните здесь для доступа в онлайн
Тэги из этой библиотеки: Нет тэгов из этой библиотеки для этого заглавия. Авторизуйтесь, чтобы добавить теги.
Оценка
    Средний рейтинг: 0.0 (0 голосов)
Нет реальных экземпляров для этой записи

Title screen

[References: p. 16183 (31 tit.)]

Lithium-zinc ferrite with the chemical formula of Li0.4Fe2.4Zn0.2O4 was prepared by continuous electron beam heating with electron energy of 1.4 MeV at 1100 °C for 140 min. X-ray diffraction analysis confirmed the formation of cubic spinel structure. From SEM analysis, the average grain size of the ferrite ceramic was 2 µm. The electromagnetic properties of LiZn ferrite were investigated. The samples are characterized by high values of the saturation magnetization, initial permeability and Curie temperature. The value of electrical resistivity is equal to 2.3×103 Ω cm. The high frequency performance of LiZn ferrite samples was estimated by measurement the frequency dispersion of the dielectric constant and dielectric loss. It was shown that the dielectric constant is characterized by normal dielectric behavior with frequency. The results were compared with the previous results obtained for the samples prepared by pulsed electron beam heating.

Для данного заглавия нет комментариев.

оставить комментарий.