Selection of the Severe Plastic Deformation Mode for Improving Mechanical Properties of AISI 201 Steel / S. V. Fortuna [et al.]
Уровень набора: (RuTPU)RU\TPU\network\4816, AIP Conference ProceedingsЯзык: английский.Резюме или реферат: Experimental studies of severe plastic deformation (SPD) by ABC forging and rolling methods have been carried out. The optimal values of accumulated strain and the deformation temperature for obtaining defect-free samples have been determined. Mechanical properties were established experimentally under compression and tension at ambient temperature. The possibility of increasing the yield strength, strength and ductility due to annealing of deformed samples was studied. According to confocal laser scanning microscopy, a change in the fracture mechanism of the samples was established, which is the main reason for the increase in the relative elongation of the annealed samples..Примечания о наличии в документе библиографии/указателя: [References: 14 tit.].Аудитория: .Тематика: электронный ресурс | труды учёных ТПУ | режимы | пластические деформации | механические свойства | стали | ковка | прокатка | механические свойства | сканирующая микроскопия | деформированные образцы Ресурсы он-лайн:Щелкните здесь для доступа в онлайнTitle screen
[References: 14 tit.]
Experimental studies of severe plastic deformation (SPD) by ABC forging and rolling methods have been carried out. The optimal values of accumulated strain and the deformation temperature for obtaining defect-free samples have been determined. Mechanical properties were established experimentally under compression and tension at ambient temperature. The possibility of increasing the yield strength, strength and ductility due to annealing of deformed samples was studied. According to confocal laser scanning microscopy, a change in the fracture mechanism of the samples was established, which is the main reason for the increase in the relative elongation of the annealed samples.
Для данного заглавия нет комментариев.