000 04759nla2a2200505 4500
001 661536
005 20231030041750.0
035 _a(RuTPU)RU\TPU\network\32159
035 _aRU\TPU\network\32156
090 _a661536
100 _a20200110a2019 k y0engy50 ba
101 0 _aeng
105 _ay z 100zy
135 _adrgn ---uucaa
181 0 _ai
182 0 _ab
200 1 _aImpact of Thermochemical Treatment on Structure and Phase State of Austenitic Alloy
_fN. Popova [et al.]
203 _aText
_celectronic
300 _aTitle screen
320 _a[References: 4 tit.]
330 _aThe paper presents the transmission electron microscope (TEM) investigations of the structure and phase composition of 0.4C-1Cr-1Ni-1Al austenite steel alloy before and after electrolytic plasma treatment or carbonitriding. Electrolytic plasma treatment is performed in an aqueous solution at 700°С for 5 min. The phase composition of the alloy, its size, volume fraction and localization are determined for carbide and carbonitride phases. The type of the dislocation substructures is determined for each phase composition, and the scalar dislocation density is measured. It is shown that before the electrolytic plasma treatment, the alloy matrix is Al[0.7]Cr[0.3]Ni[3] FCC phase which represents grains with different size. There are fine grains along the boundaries together with coarse grains. Experiments show that particles of other phases are observed inside coarse grains of Al[0.7]Cr[0.3]Ni[3] phase, namely: 1) NiAl lamellar particles (BCC phase) and 2) AlCrNi[2] rounded particles (FCC phase). Moreover, NiAl and AlCrNi[2] phases are present either in separately positioned groups or groups of single-phase grains, along the boundaries of which there are Cr[23]C[6] carbide phase particles. Al[0.7]Cr[0.3]Ni[3], AlCrNi[2] and NiAl phases are found in the specimen subsurface both before and after carbonitriding. The alloy matrix is still Al[0.7]Cr[0.3]Ni[3] phase. However, carbonitriding causes partial delamination of Al[0.7]Cr[0.3]Ni[3] and AlCrNi[2] solid solutions, which is evidenced by the deterioration (satellites and strands of the main reflections) of their diffraction patterns and a salt/pepper contrast presenting on TEM images. The formation of nanoscale Cr[2]N particles occurs inside Al[0.7]Cr[0.3]Ni[3] grains.
333 _aРежим доступа: по договору с организацией-держателем ресурса
461 0 _0(RuTPU)RU\TPU\network\4816
_tAIP Conference Proceedings
463 0 _0(RuTPU)RU\TPU\network\31884
_tVol. 2167 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 (AMHS'19)
_oProceedings of the International Conference, 1–5 October 2019, Tomsk, Russia
_fNational Research Tomsk Polytechnic University (TPU) ; Institute of Strength Physics and Materials Science SB RAS (Russia) ; eds. V. E. Panin ; S. G. Psakhie ; V. M. Fomin
_v[020287, 4 p.]
_d2019
610 1 _aэлектронный ресурс
610 1 _aтруды учёных ТПУ
610 1 _aтермохимическая обработка
610 1 _aструктуры
610 1 _aфазовое состояние
610 1 _aаустенитные сплавы
610 1 _aаустенитные стали
610 1 _aплазменная обработка
610 1 _aзерна
610 1 _aпросвечивающие электронные микроскопы
610 1 _aплотность дислокаций
701 1 _aPopova
_bN.
_gNatalya
701 1 _aNikonenko
_bE. L.
_cphysicist
_cAssociate Professor of Tomsk Polytechnic University, candidate of physical and mathematical sciences
_f1962-
_gElena Leonidovna
_2stltpush
_3(RuTPU)RU\TPU\pers\35823
701 1 _aErbolatova
_bG.
_gGulnara
701 1 _aKalashnikov
_bM. P.
_cphysicist
_cEngineer of Tomsk Polytechnic University
_gMark Petrovich
_2stltpush
_3(RuTPU)RU\TPU\pers\33561
701 1 _aNikonenko
_bA.
_gAlisa
712 0 2 _aНациональный исследовательский Томский политехнический университет
_bИнженерная школа новых производственных технологий
_bОтделение материаловедения
_h7871
_2stltpush
_3(RuTPU)RU\TPU\col\23508
712 0 2 _aНациональный исследовательский Томский политехнический университет
_bШкола базовой инженерной подготовки
_bОтделение русского языка
_h8030
_2stltpush
_3(RuTPU)RU\TPU\col\23517
801 2 _aRU
_b63413507
_c20200110
_gRCR
856 4 _uhttps://doi.org/10.1063/1.5132154
942 _cCF