000 | 03180nlm1a2200493 4500 | ||
---|---|---|---|
001 | 663402 | ||
005 | 20231030041853.0 | ||
035 | _a(RuTPU)RU\TPU\network\34571 | ||
035 | _aRU\TPU\network\33460 | ||
090 | _a663402 | ||
100 | _a20210209a2020 k y0engy50 ba | ||
101 | 0 | _aeng | |
102 | _aDE | ||
135 | _adrcn ---uucaa | ||
181 | 0 | _ai | |
182 | 0 | _ab | |
200 | 1 |
_aTemperature self-regulating flat electric heaters based on MWCNTs-modified polymers _fI. Ali, T. S. AlGharni, A. Shchegolkov [et al.] |
|
203 |
_aText _celectronic |
||
300 | _aTitle screen | ||
330 | _aThis article describes a technique for the manufacturing of the composites MWCNTs-modified elastomers. The effect of the different MWCNTs mass contents in the elastomer on specific volume and surface electrical resistivity values was investigated. The results on the heaters based on the elastomers and altered with multi-walled carbon nanotubes (MWCNTs) over various catalysts are discussed. It was found that with an increase in the MWCNTs mass content, the maximum power is achieved at a lower voltage value. Besides, temperature fields were measured on the surface of heater samples, and it was established that the temperature variation on the sample surface did not exceed 5 °C, and the heaters had a heating rate of 0.2–0.5 °C/s. Furthermore, a comparison of these heaters with the analogs previously reported by the other researchers is presented, indicating good importance of the reported work. The industrial (commercial) production of such devices is mainly associated with using in fan heaters for domestic purposes, in heaters built into clothes in underfloor heating systems and motor vehicles. The present work will find a good industrial application in the future. | ||
333 | _aРежим доступа: по договору с организацией-держателем ресурса | ||
461 | _tPolymer Bulletin | ||
463 |
_tVol. XX _v[15 p.] _d2020 |
||
610 | 1 | _aэлектронный ресурс | |
610 | 1 | _aтруды учёных ТПУ | |
610 | 1 | _aMWCNTs-modified polymers | |
610 | 1 | _atemperature self-regulation | |
610 | 1 | _avolume and surface resistance | |
610 | 1 | _aelastomer | |
610 | 1 | _aполимеры | |
610 | 1 | _aэластомеры | |
701 | 1 |
_aAli _bI. _gImran |
|
701 | 1 |
_aAlGharni _bT. S. _gTahani Saad |
|
701 | 1 |
_aShchegolkov _bA. _gAlexandr |
|
701 | 1 |
_aShchegolkov _bA. _gAleksei |
|
701 | 0 | _aJang Sung-Hwan | |
701 | 1 |
_aGalunin _bE. V. _cchemical engineer _cResearcher of Tomsk Polytechnic University, Ph.D _f1976- _gEvgeny Valerjevich _2stltpush _3(RuTPU)RU\TPU\pers\46488 |
|
701 | 1 |
_aKomarov _bF. _gFadey |
|
701 | 1 |
_aBorovskikh _bP. _gPavel |
|
701 | 1 |
_aImanova _bG. T. _gGunel |
|
712 | 0 | 2 |
_aНациональный исследовательский Томский политехнический университет _bИсследовательская школа химических и биомедицинских технологий _c(2017- ) _h8120 _2stltpush _3(RuTPU)RU\TPU\col\23537 |
801 | 2 |
_aRU _b63413507 _c20210209 _gRCR |
|
856 | 4 | _uhttps://doi.org/10.1007/s00289-020-03483-y | |
942 | _cCF |