| 000 | 03690nlm1a2200529 4500 | ||
|---|---|---|---|
| 001 | 667976 | ||
| 005 | 20231030042133.0 | ||
| 035 | _a(RuTPU)RU\TPU\network\39187 | ||
| 035 | _aRU\TPU\network\37738 | ||
| 090 | _a667976 | ||
| 100 | _a20220519a2021 k y0engy50 ba | ||
| 101 | 0 | _aeng | |
| 102 | _aCH | ||
| 135 | _adrcn ---uucaa | ||
| 181 | 0 | _ai | |
| 182 | 0 | _ab | |
| 200 | 1 |
_aSpraying of Composite Liquid Fuels Based on Types of Coal Preparation Waste: Current Problems and Achievements: Review _fR. S. Volkov, T. R. Valiullin, O. V. Vysokomornaya |
|
| 203 |
_aText _celectronic |
||
| 300 | _aTitle screen | ||
| 320 | _a[References: 61 tit.] | ||
| 330 | _aThis article discusses the atomization of composite liquid fuels. A large group of injectors is considered. A comparative analysis of the atomization characteristics (droplet sizes and velocities, jet opening angles) and the influence of the fuel characteristics (density, viscosity, component composition) and the process parameters (the ratio of the fuel-air mass flow rates, the features of the jet formation) has been carried out. Finally, the most effective types of injectors, which provide for the necessary characteristics of fuel atomization for its combustion, have been determined. The most favorable conditions for the applicability of each type of atomization have been formulated. Possible mechanisms of secondary fragmentation of droplets of composite fuels have been analyzed: those resulting from mutual collisions of droplets in the flux and from the interaction with a solid surface as well as those resulting from thermal overheating in the presence of a phase boundary or a large gradient of component volatility. A conclusion is made about the need of using a synergistic effect of primary and secondary atomization of fuel suspension droplets. | ||
| 461 | _tEnergies | ||
| 463 |
_tVol. 14, iss. 21 _v[7282, 17 p.] _d2021 |
||
| 610 | 1 | _aэлектронный ресурс | |
| 610 | 1 | _aтруды учёных ТПУ | |
| 610 | 1 | _acomposite liquid fuels | |
| 610 | 1 | _aspaying | |
| 610 | 1 | _aatomization | |
| 610 | 1 | _anozzle devices | |
| 610 | 1 | _ainjectors | |
| 610 | 1 | _aprimary andsecondary atomization | |
| 610 | 1 | _acollision modes | |
| 610 | 1 | _amicro-explosion | |
| 610 | 1 | _aкомпозитные топлива | |
| 610 | 1 | _aжидкие топлива | |
| 610 | 1 | _aмикровзрывы | |
| 610 | 1 | _aуглеобогащение | |
| 610 | 1 | _aтопливные элементы | |
| 610 | 1 | _aсмесевые топлива | |
| 610 | 1 | _aтопливные суспензии | |
| 700 | 1 |
_aVolkov _bR. S. _cspecialist in the field of power engineering _cAssociate Professor of the Tomsk Polytechnic University, candidate of technical Sciences _f1987- _gRoman Sergeevich _2stltpush _3(RuTPU)RU\TPU\pers\33926 |
|
| 701 | 1 |
_aValiullin _bT. R. _cspecialist in the field of heat and power engineering _cAssistant of the Department of Tomsk Polytechnic University, Candidate of technical sciences _f1991- _gTimur Radisovich _2stltpush _3(RuTPU)RU\TPU\pers\42019 |
|
| 701 | 1 |
_aVysokomornaya _bO. V. _cphysicist _cresearch engineer of Tomsk Polytechnic University, candidate of physical and mathematical sciences _f1984- _gOlga Valeryevna _2stltpush _3(RuTPU)RU\TPU\pers\33928 |
|
| 712 | 0 | 2 |
_aНациональный исследовательский Томский политехнический университет _bИсследовательская школа физики высокоэнергетических процессов _c(2017- ) _h8118 _2stltpush _3(RuTPU)RU\TPU\col\23551 |
| 801 | 2 |
_aRU _b63413507 _c20220519 _gRCR |
|
| 856 | 4 | _uhttps://doi.org/10.3390/en14217282 | |
| 942 | _cCF | ||